Every up-to-date Macintosh computer contains a certain number of sensors that acquire physical data of the hardware, e.g. the voltage supply of specific parts, or the temperature at selected probe locations. The equipment of sensors can be very different depending on model type. Some Macs have less than 20, others more than 100 sensors. Interpreting each reading can require special technical knowledge, which is partially a trade secret of Apple. System Monitor analyzes the sensor equipment of your system and automatically determines the most important main sensors which are characteristic for the cooling behavior of the computer. The application can display readings for the following sensors:
If you like to monitor these main sensors of your computer, perform the following steps:
The data shown is acquired live and is updated approximately every 5 seconds.
For all computers designed after mid-2007, the communication line between the main processor and the auxiliary processor responsible for sensor data acquirement was not designed by Apple for continuous data transfer. Transferring sensor readings is a costly operation, and consequently, it can put considerable load on the operating system. In order to avoid that recording sensor data may significantly reduce your computer's performance, System Monitor is not designed to refresh sensor readings in time intervals shorter than 5 seconds.
The box Menu Bar controls in which form disk performance should be displayed. System Monitor offers a variety of icons and functions that you can combine in any order. The following elements can be used:
The preferred unit to display temperature readings can be selected with the item General Settings.
If your computer does not contain a sensor which is capable of retrieving typical CPU temperature readings, or this sensor is defective, the display --- will be shown instead of a value.
Within the box, the upper bar simulates as a sample how this monitor section should be presented in the menu bar. You can grab the individual items by mouse and move them into a different order. You can remove an element by pulling it out of the bar. The lower bar contains the stock of items available. If you like to add a certain item to the menu bar, use the mouse to drag it from the lower to the upper bar. Pressing the button Default causes your current settings to be deleted, replacing it by a default suggestion for the menu bar.
If you mistakenly have removed all items of this monitoring section from the menu bar, a three-star-icon (⁂, asterism) will appear as a placeholder. This ensures that you still can open the associated menu.
You cannot drag items directly into the real menu bar because Mac OS X does not allow this.
The following items will be shown for each air blower (fan) which is monitored and controlled by the hardware:
To display the history graphs for each of the fans, set a check mark at Show history graph for fan speeds within the information item Main Sensors. The graphs are zoomed automatically, so the value range for readings acquired in the last 150 seconds will be shown in maximum detail.